HCI Performance testing made easy (Part 4)

What happens when power is lost to all nodes of a HCI Cluster?

Ever wondered what happens when all power is simultaneously lost on a HCI cluster?  One of the core principles of cloud design is that components are expected to fail, but the cluster as a whole should stay “up”.   We wanted to see what happens when all components fail at once, so we designed an X-Ray test to do exactly that.

We start an OLTP workload on every node in the cluster, then X-Ray connects to the IPMI port on each node, and powers off all the hosts while the cluster is under load.  In particular, the cluster is under read/write load (we need write workload, because we want to force the cluster to recover in-flight writes).

After power-off, we wait 10 seconds for everything to spin down, then immediately re-apply the power by connecting to the IPMI ports.

The nodes power up, and immediately start their POST (Power On Self Test) and boot the hypervisor.  The CVM will auto-start, discover the available nodes and form the cluster.

X-Ray polls the cluster manager (either Prism or vCenter) to determine that the cluster is “up” and then restarts the OLTP workload.

Our testing showed that our Nutanix cluster completed POST, and was ready to restart work in around 10 minutes.  Moreover, the time to achieve the recovery had very little variability. The chart below shows three separate runs on the same cluster.

This is the YAML file which defines the workload.  The full specification is on github.  The key part of the YAML is the nodes.PowerOff which connects to the IMPI ports of each node and vm_group.WaitForPowerOn which connects to either Nutanix Prism or vmware vCenter and determines that the cluster is formed, and ready to accept new work.

Author: gary

Performance hacker @ nutanix.com